FLUID MECHANICS & HYDRAULICS MACHINES Lab
DEPARTMENT OF MECHANICAL ENGINEERING
Programmes The Department has well equipped laboratories. The labs are provided with necessary equipment’s as per the JNTU syllabus FM & HM LABORATORY:| S.No. | Equipment Name | Capacity & Range |
| 1 | Single Stage Centrifugal Pump | 18.37 lps |
| 2 | Multi Stage Centrifugal Pump | 8.52 lps |
| 3 | Reciprocating Pump | 8.52 lps |
| 4 | Pipe Friction | H=6-28m, 0.72lps |
| 5 | Francis Turbine | Power Generated PO = 1.5 KW |
| 6 | Impact of JET on Vanes | 1.8 lps, V=15 m/S |
| 7 | Venturi and Orifice Meter | Q = 0.67 lps, H=10m |
| 8 | Turbine Flow Meter | Q = 0.67 lps, H=10m |
| 9 | Bernoulli’s Apparatus | H=6-28m, 0.9lps |
| 10 | Triangular Notch | H=6-28m, 0.9lps |
MECHANICS OF SOLIDS & METALLURGY LABORATORY
DEPARTMENT OF MECHANICAL ENGINEERING
The Department has well equipped laboratories. The labs are provided with necessary equipment’s as per the JNTU syllabus| S.No. | Equipment Name | Capacity & Range |
| 1 | Universal Testing Machine | 400 KN |
| 2 | Torsion Testing Machine | 60 N X M |
| 3 | Spring Testing Machine | 5000 N |
| 4 | Hardness Testing Machine | 2500N |
| 5 | Impact Testing Machine | 300 J |
| 6 | Muffle furnace | 1000oC |
| 7 | Specimen Mounting Press | 3 Ton |
| 8 | Jomeny end quenching Apparatus | 240lph;ID122.5mm |
| 9 | Dry and Wet Linisher | 900mmX100mm |
| 10 | Double Disc Polishing machine | 210mm, 8� |
| 11 | Binocular microscope | Co-axial & Lieca Optics |
THERMAL ENGINEERING LABORATORY
DEPARTMENT OF MECHANICAL ENGINEERING
The Department has well equipped laboratories. The labs are provided with necessary equipment’s as per the JNTU syllabus| S.No. | Equipment Name | Capacity & Range |
| 1 | 4-Stroke Single Cylinder Diesel Engine | 3.7KW, 1500RPM |
| 2 | 4-Stroke Single Cylinder Diesel Engine (Retardation) | 6KW, 660RPM |
| 3 | Cut Section Of 4-Stroke Single Cylinder Diesel Engine | 5HP, 1500RPM |
| 4 | Air Compressor | 12Kg/cm2 |
| 5 | Variable Compression ratio Petrol Engine | 2.2kw, 3000RPM |
| 6 | 2-Stroke Single Cylinder Petrol Engine | — |
MACHINE TOOLS
DEPARTMENT OF MECHANICAL ENGINEERING
The Department has well equipped laboratories. The labs are provided with necessary equipment’s as per the JNTU syllabus
| S.No. | Equipment Name |
| 1 | Lathe machine with belt drives |
| 2 | Lathe Machine with gear drives |
| 3 | Milling Machine |
| 4 | Shaping Machine |
| 5 | Sloting Machine |
| 6 | Surface Grinding Machine |
| 7 | Radial Drilling Machine |
WORK SHOP
DEPARTMENT OF MECHANICAL ENGINEERING
The Department has well equipped laboratories. The labs are provided with necessary equipment’s as per the JNTU syllabus
| S.No. | Equipment Name |
| 1 | Fitting Shop |
| 2 | Carpentry Shop |
| 3 | House Wiring Shop |
| 4 | Sheet Metal Shop |
| 5 | Welding Shop |
| 6 | Blacksmithy Shop |
METROLOGY AND INSTRUMENTATION LABORATORY
DEPARTMENT OF MECHANICAL ENGINEERING
The Department has well equipped laboratories. The labs are provided with necessary equipment’s as per the JNTU syllabus.| S.No. | Equipment Name | Capacity & Range |
| 1 | TOOL MAKERS MICROSCOPE .METZ1395A(0to50mm) | LONGITUDINAL &TRANSVERSE MOMENTS |
| 2 | DIAL BORE GAUGE | (50-160mm) |
| 3 | BEVEL PROTRACTOR | 150*300mm BLADES |
| 4 | SLIP GAUGE | (83 pieces) |
| 5 | VERNIER HEIGHT GAUGE | (0-300 mm) |
| 6 | SINE BAR | (200 mm) |
| 7 | PRESSURE GAUGE | pr cell: 10kg/cm2, Pr source : Foot pump5kg/cm2 LVDT range + 10mm micrometer 0-25mm, (NOTE: 0-50 Micro Meter is not available, it can be done as 25-50mm but for |
| 8 | LVDT TRANSDUCER | Experimental Purpose it Appt to Use 0-25mm) |
| 9 | THERMOCOUPLE | temperature range 0-1000c RTD:pt-100,thermocouple k Type, thermister 5/10ᾩ, source of measurement glass bead hg Thermometer |
| 10 | CAPACITANCE TRANSDUCER | displacement 50mm/900, capacitance sensor parallel plate Capacitor |
| 11 | PHOTO AND MAGNETIC SPEED PICKUPS | Motor: 12v fhp dc motor, speed controller: variable dc 12v |
| 12 | ROTA METER | 0.1 to 1LPM, Scale length 85mm (your Spec i.e 6 LPH to 60 LPH) 16LPH to 160LPH, Scale Length 8.5 Cm (our Spec) |
HEAT TRANSFER
DEPARTMENT OF MECHANICAL ENGINEERING
The Department has well equipped laboratories. The labs are provided with necessary equipment’s as per the JNTU syllabus.| S.No. | Equipment Name |
| 1 | THERMAL CONDUTIVITY OF METAL ROD |
| 2 | HEAR TRANSFER IN NUTURAL CONVECTION |
| 3 | H.T FORCED CONVECTION |
| 4 | EMISSIVITY MEASUREMENT APPARATUS |
| 5 | STEFAN BOLTZMANN�S APPARATUS |
| 6 | H.T THROUGH COMPOSITE WALL |
| 7 | H.T FROM PIN FIN |
| 8 | DROP WISE & FILM WISE CONDENSION APPARATUS |
| 9 | PARALLEL FLOW & COUNTER FOLW H.T EXCHARGER |
| 10 | HEAT PIPE DEMONSTRATOR |
| 11 | LAGGED PIPE |
| 12 | POOL BOILING |
PRODUCTION TECHNOLOGY
DEPARTMENT OF MECHANICAL ENGINEERING
The Department has well equipped laboratories. The labs are provided with necessary equipment’s as per the JNTU syllabus.| S.No. | Equipment Name |
| 1 | ELECTRICAL FURNACE |
| 2 | PLASTIC INJECTION MOULDING MACHINE |
| 3 | FLY PRESS with BENDING DIE, BLANKING & PIERCING DIE and DEEP DRAWING DIE |
| 4 | PLASTIC BLOW MOULDING MACHINE |
| 5 | ARC WELDING MACHINE |
| 6 | SAND PERMEABILITY and HARDNESS TESTING MACHINE |
| 7 | GAS WELDING EQUIPMENT |
| 8 | UNIVERSAL STRENGTH TESTING MACHINE |
| 9 | FOUNDRY TOOLS |
| 10 | WOOD TURNING LATHE |
